On-Site Equipment Repair.com
On-Site Equipment Repair

Welcome to On-Site Equipment Repair!

Located at the top of the North Idaho Panhandle, On-Site Equipment Repair is conveniently able to do the job right out in the field or in our shop facility. We specialize in repairing and refurbishing all makes of heavy equipment for any industry - construction, farming, logging, and mining - and offer complete services for diesel engines, differentials, electrical components, hydraulics, and transmissions. Both the shop and service trucks are set up to do welding and fabrication on the spot. So no matter where you are located or where your job may be, we aim to be there when you need us and get you back to work as soon as possible.

On-Site also offers heavy equipment consignments, sales and rentals; tell us what kind of machine you are looking for, small or large, and we will find it! For questions or assistance, please give us a call at the numbers listed below or send an email. Thank you for visiting our website; be sure to check back often for regularly updated equipment listings.


John R. Cummings - Owner

Hwy 95 South

Bonners Ferry, Idaho 83805

208.267.9201 or 208.290.2809

Click here for email.

Click on pictures below for more images.


Custom Weld Jet Boat

2003, only 156 hours, 21 foot, American jet, 350 Chevy, 8 hp. Yamaha kicker motor, I-Pilot electric motor, 2 Scotty down riggers, Garman fish finder, fully enclosed cabin, open bow area, boat is in excellent condition and needs nothing, always maintained stored inside and polished. More pictures on request, will not be disappointed.




John Deere 2054 Processor

2005, with 10,800 hours, good undercarriage, enc. Cab, heat A/C, lights, nice straight machine. Waratah  622B, 2006 processing head, large wheel, super clean with no welds.

Call For Price

Hitachi 230-5 LC

17,885 hours, good undercarriage, complete Jewell package withal guards, high and wide, cab riser, catwalks, heavy doors. Enclosed cab heat, A/C, lights. 1) Allied 2-speed hydraulic winch, PSM 52 inch log bucket. Nice straight older machine, runs out really well.




Hitachi EX270-5 LC Log Loader

Nice older log loader, everything works well, good undercarriage, cab guard, catwalks,  cab riser, engine runs fine, Rotobeck log grapple.



Call For Price


Champion 730 Road Grader

All good glass, good rubber, Cummins 6-CT engine, powershift transmission, good circle, chains, super straight clean machine.


Cat 312BL Excavator

Only 6584 hours, 1995, excellent  undercarriage, double bar pads, all good glass, woods guarded, clean in and out, Totem clam bucket could use a little work. Works and runs great.



JD 230 2-Drum Logger

2003, only 8938 hours, good undercarriage, forestry cab, lights, A/C, guarded with heavy side doors, cat walks, rock guards, CWS heavy duty bucket, 1)Pullmaster 25 ton 2-speed, 1) 15 Pullmaster 15 ton hydraulic winches and 2 medium Christy’s.


JD 250 Skidsteer

Only 1100 hours, 75% tires, enclosed cab with heat and A/C, extra rear weights, lights front and rear, GP bucket, pallet forks, aux, hydraulics and electrical , Erskin model ES 2000 snow blower. Super clean, straight and maintained machine.



Cat 525B Log Skidder

2001, 10,000 hours, 1500 hours on engine and transmission rebuild.  Enclosed cab, heat, A/C, good chains, wide blade, lights.  Has Esco 212C swing grapple, very straight clean machine.  Will be doing the usual breakup work to it before selling it.



Huber Road Grader

Nice older road grader, 6 cyl. Detroit, everything works as it should, pretty straight and clean.


Dresser TD-15 Dozer

Nice clean older machine, starts and runs great.  Solid shifting transmission, good U/C, angle blade with tilt, rippers, lights, x-county machine.



Cat 304CR Excavator

2004, 3542 hours, hydraulic thumb, fully serviced, new rubber tracks, 1 dig bucket, 1 cleanout bucket and wedge style quick coupler. Hyd. Pattern changer, blade, tight pins and bushings, no leaks, very straight and clean machine, work ready.




International Logging Truck

1996, with 360,000 miles on Detroit DD-III, 460 hp., 18-speed trany, 40,000 lb. rears, all new tires, rebuilt susp., wrappers, chains, c/b, big radio. 1994 Alpine long log rigging, 8’6’’ bunks, new cup& saucers, bunk slides and comp. bushing, all good or new brakes, all fluids changed and serviced, turn key ready to go, new batteries, clean truck with great maintenance.


Pending Sale


Kobelco SK250 LC tong thrower

11,800 hours, 85% undercarriage, high and wide with the full Jewell woods guarding, no oil leaks, extremely straight and clean machine. Jewell log bucket, 2 Pullmaster winches, all updates and services have been done. Several Christy blocks and tongs to choose from. Machine needs nothing and ready to work.



John Deere 548E Log Skidder


John Deere 548E log skidder, 85% rubber average, 28LX26 tires, new out of frame engine rebuild, hydraulic cold weather dump start, all good glass and clean interior, 19,255 machine hours, enclosed cab with a/c (too cold to verify operation but was working this summer). John Deere winch, rebuilt steering and blade cylinders, no apparent hydraulic or engine oil leaks, very straight and clean machine overall. Has the Young 170 swing grapple, pins and bushings tight to minimal movement. 1200 series front and rear differentials. Grapple control valve body has been resealed recently.




Clark Echo Logger

Please call for info and pricing.




Hitachi Zaxis160 excavator

2006, 8965 hours, 75% undercarriage, all good glass, very straight machine with no hydraulic or engine oil leaks, hydraulic quick coupler with dig bucket, hydraulic thumb.



Linkbelt 160LX excavator


2005, good undercarriage with 7530 hours, wedge style coupler, hydraulic thumb, all good glass, couple minor hyd. Leaks, starts and runs good.


Kobelco SK 160 excavator


2006, 9818 hours, 85% undercarriage, woods guarded with heavy side doors, cat walks, cab guard, right side deflector guard. All good glass, cab a/c, new main hydraulic pumps, no hydraulic or engine oil leaks.  Comes with 2 buckets. The brush grapple on the machine is $5,000 more on top of the listed price.  Very straight and clean machine.


Cat 535B Skidder

2001, Cat 535B, dual function grapple, new tires used one season, back tires 65% tread.  2 sets of chains at 70%.  Rebuilt engine has under 1000 hours. New seals in rear tranny.  Differential rebuilt by Catapiller.  New center pins with 2000 hours.



Kenworth W900L Logger

1996 Kenworth W900L logging truck, Cat 3406E, 5252 HP., Rockwell 10-speed tranny., Rockwell 40,000lb rears, rear locker, 262" WB., dual exhaust, dual stainless air cleaners, cb and big radio.  The following list is all new parts with no miles on them:  alternator, rebuilt suspension, clutch tires, Vulcan scales, brakes, drums as needed, fuel sender and guage, exhaust.  1977 Fruhauf trailer, 8'6" bunks, NEW: brakes, tires, sub bunk, paint suspension rebuilt, new wiring, new scales. Fully serviced including air filters and ready to go.




John Deere 770 CH

1998, X-County machine, 2nd owner, 8834 hours, new cutting bit, John Deere Reman Select new transmission installed under warranty from the County.  3-Shank 5-position ripper, 9-scarifire rippers, heat, a/c, 1400 R24 tires, front at 50% rear at 30%. Glass, seat, cab and all tinware are in excellent condition.  Nice clean machine.



Caterpillar 315-CL Excavator

2005, 80%, under carriage, 7484 hours, nice clean heavy duty woods guard package, cat walks, front window screen easily opens to clean, heat, A/C, lights, hydraulic Cat thumb, hydraulic pin grabber system, Cat heavy duty bucket, also 60" HPF heavy duty clean out bucket, super clean machine on it's second owner operator.




John Deere 548G Esco Swing

Enclosed cab with heat, 35% tires, all components have been rebuilt at one time, 21,444 hours, 23x126 tires, dry machine with no leaks, all tight pins and busings, very straight for the age.  Esco 212C swinging grapple, winch, extended tongs, tight snubber and good pins and bushings.


Kobelco 200 Excavator

907-2 series, 200 sized machine, 9483 hours, 80% U/C, hydraulic thumb, Isuzu engine, joystick controls, excellent glass and cab conditions, extremely straight and clean, no leaks, ver clean older machine and everyting works as it should.


John Deere 444E Loader

11,800 hours, has the 3rd valve hydraulics, comes with forks and dove tail log clamps, nice clean running loader, all good glass, no leaks, tight pins and bushings.  Enclosed cab with heat, 75% rubber and rebuilt engine.


International 5000 4x4

International Paystar 5000 4x4 dump truck.  Very clean and straight truck.  Has good rubber, DT-466 engine, 13-speed, air brakes, air plumbed to the rear, all good glass and ready to work.


Terex R-30 Haul Truck

30 ton haul truck, Detroit 8V92, 6-speed Alison trany., power steering, maxi air brakes, starts and runs great.  Solid transmission, older solid haul truck.

Serving Eastern Washington, Northern Idaho and Western Montana